zondag 14 april 2013

FLIKKA ED'S BOX OF GOLD! The Final Chapter, PART 4.

YES ITS IN !                                    >214.8x63x103L<



 TIME TO CELEBRATE! :-)           BRING OUT THE CHAMPAGNE!!!


But first, let's unwrap this custom beauty !
 
 
A flikka tool included. Yyou can use this tool for all the scews on this board. For the fins, footstraps, and ventilationplug


Hey!! Whats that underneeth the wrapping? ;-)

Think out of the box!  You'll eventually get the BOX you want!


 



                          HELLO WORLD, HERE I AM!



 
below a bunch of high resolution close ups.


COLOURS:

The tail , shining silver, grey and white combined.........




.........faded into the full the fluor violet/purple  in the nose area !

 On top of the board,  the colours exactly the other way around!  FLUOR VIOLET in the tail area!

BOARDKINGS.COM   COMING AT YA !



I think this board is sick!  The shape is allready amazing  (see part 1,2&3) and its paint makes it even more insane  :-)


 More close ups !!! HOT aint it!?

White/Silver/grey FLIKKA logos.. (stars and round circles)
 

Point-7 ...   check!




very light custom made carbon slotboxes placed inside.  Close to the rail. The widest possible  twin setup



 and TOE it is !
          if you look closely you see the fins are slightly placed toe.


 
FACTS !!!
 
and lets do the Math's
 

 
Board length: measured over rockerline,  that from tail to nose, its  218.5cm !!!
On the pic its stated  217.5cm (but you can add +1cm from the inverted fish tail)
 



Actual Board length :  in a straight line between tail to nose :    214.8cm !!!! INSANE isnt it.
 63cm wide and there should be 103Liters inside... cant wait to find that out.


 Fins:

I am going to try the board first with a TRAILER Setup,
 a Trifin but 2 bigger fins on each side where normally the thrusterfins are at, and a smaller sized fin in the middle to keep tracking still .
2x MAUI ULTRA FINS XTWIN 16.5cm on the sides  and 1x MAUI ULTRA FINS XTWIN 14.5cm  in the middle.





The MUF's are the fastest wave fins around on this planet.  and superloose! with these fins underneeth this concept will rock bigtimes!






The Weight :

To be honest,  i was so eager to put on straps and fins immediately, that i only weight the board afterwards including all the screws, straps, pads and the 3 fins.

7.35 kilogram (including all screws, pads, straps and fins)  Meaning the boards has a weight of 6+kg  something.. for a 103liters!!  and thats awesome.



 
More facts....
 
Lets see what the bottomshape is like on my Boxybaby :-)



MONOCONCAVE in front and middle section

 in the last area of the board the MONOCONCAVE it  goes  to a BICONCAVE as you can see below



 The last section into the tail,  it goes from BI-CONCAVE into V.


         
Board comes with a slightly inverted fishtail.. very cool!



 
 
LAST BUT NOT LEAST!
 
 
Tribute to,
 
 wave warrior shark 257 @ 1999 tabletop.
  no hander  7 years ago @ South Africa with the Malibu Shark 264x60
 
 A Tribute to my very first customboards i had custom built 14 years ago by Wave Warrior     
These boards came aswell with a insane special paintbrushed 3D sharkprints.
 
 
  
                                       ITS FLIKKA COMING IN NOW
 
 KILLER SHARK
 



LETS RIP UP SOME WAVES !


 This board just screams my name to be used ASAP!   

                                                             Probably tommorow @ Wijkiki Beach.


MANY THANKS TO :
@ FLIKKA.nl - Flikkaboards.com Luka and Janez for building such an amazing board for me
@ KRIS S.  for helping me digitalizing my ideas on the customprints on the board!
@ Maui Ultra Fins supporting me with these new slotbox fins!  im sure they will rock underneeth.
@ all my friends who were just as stoked about this concept as i am, and kept on spamming me with input, thoughts and ideas.



See this board in action??   STAY TUNED 8-)   Feel free to share and place a comment

 Cheers !

maandag 8 april 2013

SNEAK PREVIEW - PART 3. - FLIKKA Custom BOX Project 103L

At the time im writing this blog, my unique custom Flikka 'box' board is finished!  Yeah ! 8-)

Its allready a few days on transport from Slovenie to the Netherlands. I hope to have it in this week!

For sure, whenever its windy next weekend, i know where ill be @ !!! Ripping at my homebreaks Wijk aan Zee alias Wijkiki beach !

                                                  
The complete outline  here below:

What do you think?   yes, no, ..maybe?           ( bottomshape details, see part1 and part2.)

Feel free to share your thoughts,  i personally think it will rip those dutch nasty waves into pieces!


 
103Liters boxed up into this piece of gold :)
 
Full wide pointy nose,  thin rails in the back-end.
bulletproof construction and yet, lighter then most productionboards on the market.
 
 
 

   Whats up with the blackness in the middle?  hehe ;-)

 
Print & Design....  
 
  I just love the Fluor colours.
I choose for the purple/violet fluor colours, combined with silvergrey/white
and some special requested prints.... more of that soon!
 
 
 
 
More pictures will follow ASAP whenever it arrivés at my doorstep.
 
 
 
 
Stay tuned for part 4
 
 

Feel free to leave a comment :-)

donderdag 4 april 2013

Need for speed - with my newest P7 AC1 2K13 racesails @ Strand Horst 3 april 2013

pic above made by Janes Broekhuizen


3rd of april 2013.  Location: Strand Horst.

This freezing winterperiod finally came to an end. YES !

Today i  finally had the time to go out and get to play a bit at the lake nearby.

Rigged up one of my brandnew  Point-7 race sails AC1 2K13 6.3m2. 


Damn  its a fine looking badass sail! 




I took my time to get my settings right on the AC1 2k13 and went off.
the sail feel lighter then my former ac1's.. very stabile with  lots of drive trough windlulls.



The challenger sails teamriders Aart V. and Armand R. were out there enjoying their  new Challenger Aero racesails '13.


Today it was  Black vs White  .....   Point- 7 vs  Challenger :-)

As its been forever ago (6months) that ive been on a slalomboard, it took me like 5 minutes to get used ;o).




Gopro hero3 black  screenshots! 





taking a little break with my speedbuddy Aart V.

 easy cruising


full speed going in. 


nicely powered up


 Always wave when there is a camera around... SPEEDCRASH :)




Easterly wind (totally offshore at the northsea, not able to do a wavesession), with a force 6 beaufort and SUN!  16 upto gusts 29 knots.       What can you wish more.




The rotating goes superb!


Jibing full speed , doing my downwind runs... as its been yesterday hehe.
and what about speeds?? well ive been cruising  a lot  today, it was quite choppy with this winddirection. The lulls werent long enough and close to the beach there was no wind at all.  But so now and then had nice speeds.  as on this picture below.


The quiver i used ;  AB+54/78L + Point-7 AC1 2K13 6.3 + C3 Slingshot 23cm.






but as the wind dropped during the afternoon i  switched boards to a bigger version of the  AB+59/95L / C3 Slingshot 25cm.


A nice day it was to be on the water again.

Stay tuned!

 

zaterdag 30 maart 2013

SNEAK PREVIEW - PART 2. FLIKKA ED'S BOX


The
                                                story continuess....................

Here a nice picture from the board when it just came out of the 4-axis KMS3200 CNC Machinery.
The board still needs a lot of sanding here below.


Strapstance:  I wanted to play a little with the settings of the straps. Normally you can choose a strapstance between 42-46cm. I personally like to have a wide strapstance. It gives me good control over the board. I can lean more into the waveface while bottumturning. I measured my favourite strapstance from my other 2 waveboards. A wide stance it is! Placed it on 46cm and 47cm. The frontstrap in just one insert option and back in the tailarea 2 insert options.  The backstrap is placed quite back towards the tail and insert option 2 is even further back ;).  2 screws on each side of the footstrap, making sure it shouldnt ever break or get loose.


Single, twin, tri, thruster or quad?  :  A very wide twinfin setup with a trailerfin in the center it is, this should make the board feel loose and turn like crazy!


3 slotboxes,  aswell for the center/trailerfin (instead of the USbox). It saves a bit of weight too.
The side boxes are placed 'toe' and maximally towards the rail. This setup should make the board very manouvrable. In my thinkingwise even more loose then a quad setup.

FINS: Probably placing 2x Maui Ultra Fins X-Twins 16.5cm in the sideboxes and in center a  Maui Ultra X-Twin 14.5cm.
But i'll try for sure more fincombinations, that to play with the concept and find out whats best. The finsetup mentioned above would be the one to begin with.

                       

Bottomshape:  As the board is quite short and wide, it aint the fastest waveboard on the market (read: slow)  That's why it comes with a fast waverocker to mantain a little speed still and gives it very good planing capabilities.  A monoconcave bottom, into biconcave for the last 50cm of the board into a V in the tail.
 In the Netherlands the conditions are in general, mushy, choppy and most of all nasty!
Combined with strong currents & sideonshore windconditions. This bottomshape should do the trick. 



This custom is built with a sweetspot on the 5.6m2.. Point-7 SALT '13!

Sailrange:  5.0m2 as a minimum to a maximum sailsize of 6.2m2.  The 5.0m2 is the sailsize where i eventually switch boards to a 85Liter quad.

Square, swallow, pin, fish, keelquad,diamond, zippytail...
What shall i choose for my full customized Flikka?



As its really a lightwindboard i didn't want the cutout to much inverted to the backstrap. As you can see here on the picture above its a squaretail but rounded slightly inverted - fish tail. The rails around the tail mantained very thin, that with a 103liter pumped inside this piece of gold. :-)  

 Why would go production, if you can go for Custom Made! :-)
 
                                   below some more pictures

                                                                 The wide point  ;)

Check out all the extra (white)dyneema reinforcements  in the nose area 

and aside the mastrail , its bombproof!




The area where the footpads are going to be placed looks like it has nice reinforcements aswell. 
Soft decks are history! Cant wait to abuse the board on the water anytime soon. 

                 Trust me,     the best is still yet to come !

                                  Stay tuned for part 3 !